After you control on your PC, on the off chance that you don't see the work area stacking yet a blue screen with mistake message System thread exception not handled it can be exceptionally disappointing. Be that as it may, don't stress. You can settle the blunder with one of the strategies in this post.

Blow are three strategies to attempt. You might not need to attempt them all. Simply work your way down the rundown until the point that you locate the one that fixes the issue.

Vital: You'll should be signed into Windows on the issue PC to attempt any of these arrangements. In the event that you can't sign into Windows, restart it in Safe Mode, at that point attempt these techniques.

Technique 1: Update the driver that may cause the issue

Technique 2: Check for BIOS refresh

Technique 3: Confirm that any equipment introduced is good with your Windows

Technique 1: Update the driver that may cause the issue

Flawed drivers can cause this mistake, particularly broken illustrations card drivers. You may likely observe SYSTEM_THREAD_EXCEPTION_NOT_HANDLED took after by igdkmd64.sys (see Figure 1-1). igdkmd64.sys is normal known as Intel Graphics Kernel Mode driver, which is in charge of controlling Windows Operating System. In the event that the drivers are to blame or have clashes with different drivers or projects, you can't boot your PC and get BSOD blunders.

Figure 1-1

To begin with, utilize Event Viewer to distinguish the driver that may cause the issue. Take after these means:

TIP: If you experience issues recognizing the driver physically, we prescribe utilizing Driver Easy to refresh the driver consequently.

1) On your console, press the Windows logo key and R key in the meantime to conjure the run summon.

2) Type cmd and press Enter.

3) Type the order line eventvwr and press Enter. From that point forward, the Event Viewer will begin.

4) When the Event Viewer begins, in the tree support, grow section Windows Logs, at that point click System.

5) In the correct reassure, tap the Source tab to sort one after another in order and endeavor to discover the issue driver(for illustration, igdkmd64.sys). You can find the System Thread Exception Not Handled blunder by the "Date and Time".

After you recognize the driver that causes the issue, refresh the driver.

The most effective method to refresh the driver

You can refresh the driver either physically or naturally:

Manual driver refresh – You can refresh the driver physically by heading off to the maker's site and looking for the latest right driver. On the off chance that you don't have room schedule-wise, persistence or PC aptitudes to refresh your drivers physically, you can, rather, do it naturally with Driver Easy.

Programmed driver refresh – Driver Easy will consequently perceive your framework and locate the right driver your PC needs. You don't have to know precisely what framework your PC is running or who the gadget's maker. Nor do you have to chance downloading and introducing the wrong driver, and you don't have to stress over committing an error when introducing. You can basically refresh every one of your drivers naturally with either the FREE or the Pro form of Driver Easy. In any case, with the Pro form there's nothing more needed than 2 ticks, and you get full help and a 30-day unconditional promise:

1) Download and introduce Driver Easy.

2) Run Driver Easy and click Scan Now. Driver Easy will at that point check your PC and distinguish any issue drivers.

3) Click the Update catch by the driver to consequently download and introduce the right form of this driver (you can do this with the FREE form). Or then again click Update All to naturally download and introduce the right form of the considerable number of drivers that are absent or obsolete on your framework (this requires the Pro form – you'll be provoked to overhaul when you click Update All).

Here take Intel HD Graphics 4400 for instance.

Technique 2: Check for BIOS refresh

The BIOS (Basic Input/Output System) contradiction, memory struggle or the IRQ (Interrupt Request) strife can be the reason for the mistake. So you can endeavor to refresh the BIOS.

You can go to the motherboard producer's site to check for the BIOS refresh. Before you make a beeline for the site, guarantee you know the item name of the motherboard.

In the event that you have no clue the model number of the motherboard, take after these means:

1) On your console, press the Windows Logo key and R key in the meantime to summon a run charge.

2) Type cmd and press Enter.

3) Type underneath summon line or simply reorder it to the charge incite. At that point you'll get the motherboard maker and the model item number.

wmic baseboard get maker, item

Figure 2-1

For our situation (see Figure 2-1), the maker is Dell and the item number is 0T1D10.

On the other hand, on the off chance that you have a pre-constructed PC as opposed to building your own, you can go to the PC maker's site. Search for the PC show and download the BIOS there.

Profiles downloaded document is either in .compress organize or in .exe design. It's somewhat confused to introduce the BIOS. The maker gives the establishment directions on their site. You ought to have the capacity to see it when you make a beeline for the BIOS download page. Simply take after the directions to introduce the BIOS. In case you're not happy with introducing BIOS yourself, please contact the producer to help with that.